Voltage Sags - Internal

Voltage sags result from a changing current interacting with a power system's impedance. Sags may occur at the utility level or from nearby customers, but the main source of voltage sags is a customer's own loads and power system.

When a sag occurs, the power supply inside electronic devices uses some of its stored energy to compensate for the loss of input voltage. If enough energy is lost due to the sag, then the power supply may lose its ability to maintain an exact DC voltage to all the integrated circuits inside the device - even for a few milliseconds. Well, this is time enough for a the 1's and 0's inside to get confused, and data gets lost or corrupted.

When voltage sags are a problem, the first step in solving it is to identify what is being disrupted and why. Where is the load causing the changing current? If that load or group of loads can be located, then a solution may be as simple as relocating either the victim or the culprit. The sag no longer affects the same equipment or the same part of the system.

Since sags are closely dependent on the wiring impedance, another possible solution is to increase the wire size in the distribution path for the sensitive load or loads. Increasing the size decreases the impedance, ultimately reducing the magnitude of the sag.

Should these steps not be possible, then voltage regulation must be introduced to maintain voltage stability and keep data integrity.

Voltage regulators may be stand-alone devices, or used with other technologies such as transformers to add to their capabilities. Once again, please remember that to properly provide a solution means you must understand the problem and ensure the solution is appropriate.